Product Overview
The Schneider Electric LMC600CBD10000 is a PacDrive 3 LMC600 high-performance logic motion controller supplied with one OM-NE real-time Ethernet communication module. It combines PLC logic, synchronized control of up to 99 Sercos servo or robot axes, integrated I/O and multiple industrial communication interfaces.
The OM-NE module has its own communication processor and provides two additional Ethernet connectors for Ethernet-based real-time fieldbus protocols. The exact protocol, module hardware code and controller configuration must be confirmed from the installed machine project.
Main Features
- Exact commercial reference: LMC600CBD10000
- PacDrive 3 LMC600 logic motion controller
- Maximum control capacity of 99 synchronized Sercos axes
- Accessory Kit supplied with one OM-NE module
- Two additional RT-Ethernet connectors
- OM-NE module with independent communication processor
- Intel Pentium M 2.0 GHz processor
- 2 MB L2 processor cache
- 256 kB NVRAM
- CompactFlash card project storage
- Integrated Sercos, Ethernet, CANopen and Profibus communication
- Digital and analog I/O integrated into the controller
- Two option-module slots
- Temperature-controlled fan and diagnostic display
Technical Specifications
| Model |
LMC600CBD10000 |
| Series |
PacDrive 3 LMC Pro |
| Product Type |
Logic Motion Controller |
| Accessory Package |
Accessory Kit with OM-NE |
| Included Option Module |
One OM-NE RT-Ethernet communication module |
| UPS Included |
No |
| Maximum Servo or Robot Axes |
99 Sercos axes |
| Processor |
Intel Pentium M 2.0 GHz |
| Processor Cache |
2 MB L2 cache |
| Controller Memory |
Confirm by hardware revision and nameplate |
| NVRAM |
256 kB |
| Storage |
CompactFlash card, minimum 128 MB |
| Operating System |
VxWorks with SEAutomation Kernel |
| Programming Languages |
LD, CFC, SFC, IL, FBD and ST |
| Rated Supply |
24 VDC |
| Digital Inputs |
20 |
| Interrupt Inputs |
4 |
| Touch-Probe Inputs |
16 |
| Digital Outputs |
16, maximum 250 mA per output |
| Analog Inputs |
2 configurable voltage or current inputs, 12-bit |
| Analog Outputs |
2 voltage outputs, 12-bit |
| Sercos |
2 * RJ45 |
| Standard Ethernet |
1 * RJ45 10/100BASE-T |
| Integrated RT-Ethernet |
2 * RJ45 |
| Additional RT-Ethernet |
2 Ethernet connectors on OM-NE |
| CAN / CANopen |
1 * SUB-D9 |
| Profibus DP |
1 * SUB-D9 master/slave interface |
| Serial Interfaces |
RS232 and RS422/RS485 |
| USB |
USB 2.0 Type-A host |
| Option-Module Slots |
2; one slot occupied by OM-NE |
| OM-NE Hardware |
Verify module hardware code and installed protocol before replacement |
| Cooling |
Temperature-controlled fan |
| Diagnostic Display |
4 * 20 character alphanumeric display |
| Protection Rating |
IP20 |
| Dimensions |
Approximately 100 * 310 * 243 mm |
| Approximate Net Weight |
3.5 kg before kit-specific accessories |
| Country of Origin |
France |
| Lifecycle |
Discontinued legacy product |
Compatible System and Applications
The LMC600CBD10000 is intended for PacDrive 3 machines requiring high-axis-count motion control and additional Ethernet-based real-time communication. Applications include high-speed packaging lines, robotic production cells, printing and converting machinery, synchronized handling equipment and machines exchanging cyclic process data with Ethernet field devices.
The OM-NE option can be configured for supported Ethernet-based fieldbus protocols through the controller project. Protocol compatibility, IP configuration, topology, cycle time, connected devices and option-module hardware code must be verified before installation.
Maintenance and Replacement Notes
Before replacement, confirm the complete LMC600CBD10000 reference, OM-NE module hardware code, installed option slot and active Ethernet protocol. Record the IP addresses, topology and field-device configuration before disconnecting the controller.
Back up the CompactFlash card and project. Confirm firmware, hardware revision, controller memory, Sercos axis configuration, CANopen and Profibus networks, I/O assignments, master encoder and complete cable set.
The basic LMC600CAA10000 does not include the same OM-NE package and is not automatically equivalent. Migration to a newer controller requires verification of the real-time Ethernet protocol, application project and complete machine architecture.
Related Models
LMC600CBG10000 contains two OM-NE modules. LMC600CBI10000 combines OM-C CAN with OM-NE, while LMC600CBL10000 combines OM-P Profibus DP with OM-NE.
UPS-equipped RT-Ethernet versions include LMC600CCD10000 with one OM-NE, LMC600CCG10000 with two OM-NE modules, LMC600CCI10000 with OM-C plus OM-NE and LMC600CCL10000 with OM-P plus OM-NE.
Inquiry and Supply Notes
Please provide the complete commercial reference, controller nameplate, OM-NE module photographs, firmware information and details of the installed Ethernet protocol. Confirm whether the CompactFlash card and original option module must be included.
Module hardware code, controller revision, network compatibility, product condition, testing status, availability and delivery time must be confirmed before quotation.
|
|
Schneider Electric LMC600CBD10000 PacDrive 3 LMC600 Motion Controller Images
|
