Product Overview
IAI SCON-CB-100WAI-NP-3-2 is a single-axis servo actuator controller designed for use with a matching IAI electric actuator. The controller manages programmed positioning, actuator movement, acceleration and deceleration settings, position-complete signals, operating status and alarm monitoring within an industrial automation system.
This configuration uses NP NPN sink-type parallel I/O. It is suitable for machines where a PLC selects stored positions, issues start commands and receives operating or completion signals through discrete wiring. The complete controller model and connected actuator configuration must be verified before installation.
Main Features
- Single-axis positioning control for a compatible IAI servo actuator
- SCON-CB controller platform for industrial motion applications
- 100WAI actuator and feedback configuration code
- NP NPN sink-type parallel I/O specification
- Supports stored position selection and PLC-controlled movement
- Provides operating, position-complete and alarm status signals
- Suitable for machine construction, maintenance and controller replacement
Technical Specifications
| Brand |
IAI |
| Model |
SCON-CB-100WAI-NP-3-2 |
| Controller Series |
SCON-CB |
| Product Type |
Single-Axis Servo Actuator Controller |
| Controlled Axes |
1 Axis |
| Actuator / Feedback Code |
100WAI |
| Control Method |
Positioner Control |
| I/O Specification |
NP |
| I/O Logic |
NPN Sink Type |
| Configuration Suffix |
3-2 |
| Power Requirement |
Confirm Exact Controller Nameplate |
| Compatible Equipment |
Matching IAI Servo Actuator |
Related Models
Related IAI family variant: SCON-CB-200WAI-CC-0-2. This model belongs to the SCON-CB controller family but uses a different actuator capacity code and a CC-Link network interface. It is included for family reference only and is not automatically interchangeable with SCON-CB-100WAI-NP-3-2.
Before selecting either controller, confirm the complete model code, connected actuator, rated capacity, encoder and feedback configuration, NPN or network interface, power supply, firmware, connectors and stored parameters.
Compatible Systems and Applications
The SCON-CB-100WAI-NP-3-2 can be used in automated assembly stations, component-transfer mechanisms, inspection systems, packaging machinery, production fixtures and material-handling equipment. A compatible PLC can select stored positions and coordinate actuator movement with the wider machine sequence through NPN parallel I/O.
The controller should be paired only with the actuator configuration identified on the controller and actuator nameplates. Similar SCON-CB controllers may have different motor capacities, encoder specifications, communication interfaces or internal options.
Maintenance and Replacement Notes
Back up the position table, acceleration settings, speed settings and controller parameters before removing the existing unit whenever communication remains available. Photograph the terminal connections and record the PLC input and output assignments before disconnecting the wiring.
Confirm that the machine uses NPN sink-type signals. An NP controller should not be replaced with a PN, CC-Link, EtherNet/IP, EtherCAT or other network version without reviewing the PLC wiring and control program. The complete 100WAI-NP-3-2 suffix must be checked rather than selecting by the SCON-CB series name alone.
Inquiry and Supply Notes
Please provide clear photographs of the complete controller label, connected actuator nameplate and I/O connectors when requesting a quotation. Firmware, included terminals, parameter backup requirements, product condition, warranty and delivery time should be confirmed before ordering.
|
|
IAI SCON-CB-100WAI-NP-3-2 Single-Axis Controller Images
|
