Product Overview
The Schneider Electric LMC300CBD10000 is a PacDrive 3 LMC300 motion controller fitted with one real-time Ethernet option module. It controls up to 8 synchronized servo axes through Sercos and integrates PLC logic, motion processing, industrial networking and local digital and analog I/O.
This version is intended for machine configurations requiring an additional real-time Ethernet interface. The exact Ethernet protocol and machine-network function must be confirmed from the installed option module, controller project and hardware revision.
Main Features
- Exact commercial reference: LMC300CBD10000
- PacDrive 3 LMC300 motion controller
- One RT-Ethernet option module
- Maximum control capacity of 8 Sercos servo axes
- Intel Celeron M 1.5 GHz processor
- 512 MB DDR2 RAM and 128 kB NVRAM
- CompactFlash card storage
- 24 VDC rated supply
- Integrated Sercos, Ethernet, CANopen, USB and serial interfaces
- Integrated digital and analog I/O
- Master encoder and PacNet interfaces
- IP20 cabinet-mounted design
Technical Specifications
| Model |
LMC300CBD10000 |
| Series |
PacDrive 3 LMC Pro |
| Controller Designation |
LMC300 |
| Variant Group |
OM-NE |
| Installed Option |
One RT-Ethernet option module |
| Integrated UPS |
No |
| Maximum Controlled Sercos Axes |
8 |
| Processor |
Intel Celeron M 1.5 GHz |
| RAM |
512 MB DDR2 |
| NVRAM |
128 kB |
| Memory Card |
CompactFlash card, at least 128 MB |
| Rated Supply |
24 VDC |
| Power Consumption |
Approximately 36 W |
| Digital Inputs |
20 digital inputs, 4 interrupt inputs and 16 touch-probe inputs |
| Analog Inputs |
2 inputs, ±10 V or ±20 mA, 12-bit |
| Digital Outputs |
16 outputs, maximum 250 mA each |
| Analog Outputs |
2 voltage outputs, 12-bit |
| Motion Network |
2 Sercos RJ45 interfaces |
| Network Option |
One RT-Ethernet option module |
| Other Communication |
Ethernet, CANopen, USB, RS232 and RS422/RS485 |
| Programming Languages |
ST, FBD, CFC, LD, IL and SFC |
| Real-Time Operating System |
VxWorks with SEAutomation Kernel |
| Protection Rating |
IP20 |
| Operating Temperature |
5–55 °C |
| Dimensions |
Approximately 100 * 310 * 243 mm |
| Approximate Net Weight |
3.5 kg |
Compatible System and Applications
The LMC300CBD10000 is suitable for machines requiring coordinated Sercos motion control and an additional real-time Ethernet connection. Typical applications include packaging machinery, robotic handling equipment, converting systems, production lines and machines exchanging cyclic data with Ethernet-based control or I/O equipment.
The exact supported RT-Ethernet protocol, option-module version, network topology and controller-project configuration must be verified before replacement or migration.
Maintenance and Replacement Notes
Confirm the complete commercial reference, installed RT-Ethernet module and network protocol. Back up the CompactFlash card and controller project. Record the IP addresses, network topology, field-device configuration and option-module settings before disconnecting the original controller.
Verify the firmware, hardware revision, Sercos network, CANopen configuration, serial interfaces, I/O wiring and cable set. At machine level, confirm the connected servo drives, motor matching, brake option, encoder type and shaft configuration.
Related Models
LMC300CBG10000 contains two RT-Ethernet option modules. LMC300CBI10000 combines CAN and RT-Ethernet, while LMC300CBL10000 combines Profibus DP and RT-Ethernet. UPS-equipped RT-Ethernet variants include LMC300CCD10000, LMC300CCG10000, LMC300CCI10000 and LMC300CCL10000. The basic controller is LMC300CAA10000.
Inquiry and Supply Notes
Please provide the complete commercial reference, nameplate photographs, firmware details and information about the installed RT-Ethernet network. Confirm whether the CompactFlash card and original option module are required. Protocol compatibility, hardware revision, condition, availability and delivery time must be confirmed before quotation.
|
|
Schneider Electric LMC300CBD10000 PacDrive 3 LMC300 Motion Controller Images
|
